In this section you will find the release notes for each version we release under this major version. If you are looking for the release notes of previous major versions use the version switcher at the top left of this documentation book. Here is a breakdown of our major version releases.

• Versions 5.x - Mar 2020 - May 2021

• Versions 4.x - Jun 2018 - Sept 2019

• Versions 3.x - Feb 2016 - Nov 2017

• Versions 2.x - June 2015 - Nov 2015

• Versions 1.x - Feb 2015

In this section you will find the release notes for the 5.x version of CommandBox.

• Version 5.4.2 - October 2021

• Version 5.4.1 - September 2021

• Version 5.4.0 - August 2021

• Version 5.3.0 - May 2021

• Version 5.2.1 - Dec 2020

• Version 5.2.0 - Nov 2020

• Version 5.1.1 - June 2020

• Version 5.1.0 - May 2020

• Version 5.0.0 - Mar 2020

Release Notes

Bug

COMMANDBOX-1374 Some installs unnecessarily write to the box.json

COMMANDBOX-1370 ConfigService::settingExists() fails in race conditions due to non-varscoped variables in JSONService

Improvement

COMMANDBOX-1372 Support excludePaths in watcher DSL and watch command

COMMANDBOX-1369 Ensure Adobe wars have a seeds.properties file

COMMANDBOX-1368 Add tab complete for "env clear" command

COMMANDBOX-1367 Ignore empty startScript on server start

• There is a fix for a regression introduced in 5.4.0 where updating the version of a CF engine doesn't work without forgetting the server first.

• There is also an important security improvement to CommandBox servers. Thanks to Abram Adams for reporting this to Ortus so we could address it.

Release notes

Note, the details of the security improvement have been tracked privately.

Bug

COMMANDBOX-1382 Java path shows up twice in "server info --verbose"

COMMANDBOX-1381 Updating server in-place keeps old web.xml path

COMMANDBOX-1375 recipe with multiple "install" instructions fails

Improvement

COMMANDBOX-1380 Add additional interceptData to server interceptors

COMMANDBOX-1379 Update to WireBox 6.5.2

COMMANDBOX-1376 Immediately activate modules after installation

COMMANDBOX-1349 Improve multiselect DSL

Story

COMMANDBOX-1120 Add JSON and Properties output for info command

web.xml Overrides

When you start an Adobe or Lucee CF Engine, the WAR CommandBox uses has a stock web.xml baked into it. Sometimes you may want to add custom servlets, servlet mappings, etc into your server. You can override the stock web.xml in part or in total with a file of your own which you specify in the server.json like so:

{
  "app" : {
    "webXMLOverride" : "path/to/web-override.xml"
  }
}

More info here:

https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/web.xml-overrides

Funky Parameters

In addition to quoting parameter values, parameter names can also be quoted. This is useful when setting keys into settings or JSON files that have spaces, hyphens or special characters. Each of these examples are now supported:

# quoted string
package set foo."bar.baz"=bum

# bracketed string
package set foo[bar.baz]=bum

# quoted, bracketed string
package set foo["bar.baz"]=bum

More info here:

https://commandbox.ortusbooks.com/usage/parameters

Library updates

Lucee Server has been updated to 5.3.8.201 and JBoss Undertow has been updated to 2.2.10.Final. The Lucee update, as usual, applies to the CLI as well as the default server you get when you run server start.

Smarter Jar Endpoint

When you install a Jar via HTTP URL and the version number is baked into the URL, the jar endpoint now makes more assumptions about what the version of the package is that allows it to optimize the update checks and eliminate unnecessary downloads.

More info here:

https://commandbox.ortusbooks.com/package-management/code-endpoints/jar-via-http#semantic-versioning

ask and confirm commands

Here are some fun commands for user interactivity in the shell. You can use these as part of a recipe or a nice "one-liner".

ask

The ask command is similar to the ask() method in Task Runners. It requires an interactive terminal and will ask the user a question and return their answer. It is meant to be changed with other commands.

set color=`ask "favorite Color? "`
echo "you said ${Setting: color not found}"

or with default values

ask question="Who is cool? " defaultResponse="Balbino!"

or with masked input

ask question="What is your password? " mask=*

Or fun stuff like this

ask "Secret phrase: " | assertEqual "mockingbird" || echo "access denied!" && exit 1

confirm

The confirm command will ask the user a yes/no question and return a passing or failing exit code from the command based on the answer.

confirm "do you want to update your packages? " && update

Remember the && operator will only execute the second command if the first command returns an exit code of 0.

More info here:

https://commandbox.ortusbooks.com/helpful-commands/ask-and-confirm

server prune command

You can easily forget all servers which have not been started for a certain period of time with the server prune command. It accepts the number of days that need to have passed since a server was last started in order to prune it.

server prune days=30

# Skip the confirmation check
server prune --force

More info here:

https://commandbox.ortusbooks.com/embedded-server/manage-servers#prune-old-servers

Release Notes

Here are the full release notes for CommandBox 5.4.0

Bug

COMMANDBOX-1364 Cancelling a prompt with active job doesn't clear job logs

COMMANDBOX-1361 Param tab completion is off-by-one when piping

COMMANDBOX-1360 Can't list files in directory with brackets ( [ or ] ) in the name

COMMANDBOX-1356 forgebox timeout is too small when publishing packages

COMMANDBOX-1354 dir command returns no results in drive root

COMMANDBOX-1353 Summary over 200 chars in box.json causes error when publishing

COMMANDBOX-1352 Addition of Apache logging classes breaks 3rd party libs using it

COMMANDBOX-1350 Installing a system module as one-off command doesn't clear wirebox metadata cache

COMMANDBOX-1348 Commenting server rules doesn't work correctly in text files

COMMANDBOX-1346 CommandDSL doesn't handle struct args

COMMANDBOX-1344 create a server prune command

COMMANDBOX-1339 Server start can hang when CF engine blows up

COMMANDBOX-1338 Tab complete doesn't work after a pipe

COMMANDBOX-1337 Working dir of server custom menu items doesn't default properly

COMMANDBOX-1336 Error when setting failing exist code in Task Runner

COMMANDBOX-1334 updating commandbox to 5.3.1 via Homebrew breaks with a java error

COMMANDBOX-1333 Rewrite rule with query string doubles up question mark

COMMANDBOX-1332 printTable column validation breaks with spaces in list

COMMANDBOX-1330 Directory listing not showing folders properly when names are numeric

COMMANDBOX-1230 Certain Java installs fail version check

Improvement

COMMANDBOX-1366 ask and confirm command to capture user input from shell

COMMANDBOX-1365 Improve version handling in JAR endpoint

COMMANDBOX-1351 Update to Lucee 5.3.8

COMMANDBOX-1347 Support dots in struct keys with set/show/clear commands

COMMANDBOX-1342 printTable custom header names for non-array input

COMMANDBOX-1331 Add printTable check for data with no columns

COMMANDBOX-1329 Sort column names in printTable --debug

New Feature

COMMANDBOX-1362 Set env vars directly in server.json for local one-off overrides

COMMANDBOX-1011 Support web.xml Overrides

Task

COMMANDBOX-1363 Update to Undertow 2.2.10.Final

Updated bundled Java libraries

• JLine - 3.19.0

• jGit - 5.11.0.202103091610-r

• Launch4j - 3.14

• JANSI - 2.3.2

Recursive jar scanning libDirs

When you configure libDirs for a server, CommandBox used to only load jar files found in the root. Now it will include sub directories which gives you more flexibility around how to install your jars.

New printTable Command

In the previous release, we introduced a new helper for printing ASCII Art tables in your custom commands and task runners. We've taken this a step further and wrapped the table printer utiilty in a new command so you can use it from the CLI directly. We've also expanded its functionality to accept ANY data in as JSON and it will marshall it into a query for you. This means it can be a query, an array of structs, an array or arrays, and more. You can now get quick and easy visualization of any data right from the CLI or in builds.

New sql command for on-the-fly manipulation of data

As if the previous command isn't cool enough, we've also added a new "sql" command which will also accept any sort of data as JSON, marshall it into a query object and allow you to alias, filter, order, and limit the rows on the fly using CFML's query of queries!

The sql command works very nicely with the new tablePrinter command, and truly makes JSON a first class citizen of the CommandBox CLI.

Small change to print.table() helper

We've made a small adjustment to the print.table() helper that was introduced in CommandBox 5.3.1 as follows. The old method signature is

And the new method signature is:

The parameters to the new printTable command matches the NEW method signature of the print.table() helper as well.

Format XML in REPL

When working with XML in the REPL, formatting is now applied when the XML is printed out to the console, making it easier to read (same as JSON)

Release Notes

Bug

Improvement

New Feature

This release was primarily to address a regression in 5.1.0 affecting Mac OS users who tried to start Lucee servers. If you see an error similar to this on a Lucee server and you're running a Mac and CommandBox 5.1.0, then this release will fix it for you.

lucee.runtime.exp.NativeException: mac os x is not a supported OS platform.

If you are upgrading from CommandBox 5.1.0, there are only a handful of tickets which are listed below. If you are updating from an earlier version of CommandBox, please check out our 5.0.0 and 5.1.0 release blogs.

Release notes

Bug

• [COMMANDBOX-1107] - Overzealous gitignore matching of parent directories when zipping up for ForgeBox storage

• [COMMANDBOX-1173] - Enabling SSL results in some CFHTTP requests to fail.

• [COMMANDBOX-1178] - writedump failing in Lucee

• [COMMANDBOX-1179] - File globbing matching partial file names

Improvement

• [COMMANDBOX-1181] - Allow for verbose startup without debug logging of requests

Java 14 support

Java 14 is now supported in CommandBox 5.1.0. In order to support Java 14, we had to stop using Pack200 which means the binary sizes have grown a little. The good news is CommandBox will start up a little faster on its first run since there's less to unpack now.

Start pure HTML Server

You can start up a lightweight server that only serves static files now with CommandBox.

server start cfengine=none

https://commandbox.ortusbooks.com/v/5.1.0/embedded-server/start-html-server

New CommandBox Light and CommandBox Thin Binaries

In pursuit of the smallest possible Docker images, we have CommandBox light which is built on Lucee Light. We also have a box "thin" binary you can swap out with the full self-extracting binary when using CommandBox in custom docker images. Check out Pete Freitag's Minibox image to see both of these in use in a super tiny 78 Meg docker image. More docs here:

https://commandbox.ortusbooks.com/v/5.1.0/setup/light-and-thin-binaries

Force working directory when starting

If you're using box in an integration where you want it to start up in a specific working directory, there is a new bootstrap CLI arg for that.

box -cliworkingDir=C:/my/path/here/

https://commandbox.ortusbooks.com/v/5.1.0/usage/execution#custom-working-directory

Server tray menu item custom commands

You've always been able to specify custom menu items in your server.json or global config settings, but we've kicked it up a notch. Not only can you contribute to existing sub menus now, you can execute arbitrary native commands synchronously or async.

{
    "trayOptions" : [
        {
            "label" : "Does the Internet work?",
            "action" : "run",
            "command" : "ping google.com"
        },
        {
            "label" : "Math is math!",
            "action" : "runAsync",
            "command" : "calc.exe"
        },
        {
            "label" : "Update dependencies",
            "action" : "runTerminal",
            "command" : "box update"
        }
    ]
}

Release Notes

Here's the full list of tickets closed down in the 5.1.0 release.

Bug

• [COMMANDBOX-1121] - Runwar deadlocks when using Lucee server warmup flag

• [COMMANDBOX-1122] - Server start console output isn't always formatted correctly

• [COMMANDBOX-1125] - Boolean env var causes error on server start

• [COMMANDBOX-1127] - Output of foreach can't be piped

• [COMMANDBOX-1133] - Lucee Extension install doesn't recognize Lucee Light

• [COMMANDBOX-1135] - Package unlink command misspelled parameter moduleDirectory as moduleDrectory

• [COMMANDBOX-1137] - Package link command misspelled parameter moduleDirectory as moduleDrectory

• [COMMANDBOX-1140] - Tab complete doesn't work on Windows paths with backslashes

• [COMMANDBOX-1144] - CommandBox Watcher shows error on Ctrl-C

• [COMMANDBOX-1148] - Extension management doesn't "recognize" a Lucee server started with --dryRun

• [COMMANDBOX-1151] - Downgrading a package with install doesn't work without --force

• [COMMANDBOX-1152] - The run command doesn't always seem to kill interactive binaries

• [COMMANDBOX-1154] - Relative paths incorrect in drive root on *nix

• [COMMANDBOX-1166] - Using a warPath of ./ gets normalized to "" and then ignored in subsequent starts

• [COMMANDBOX-1176] - native commands with * can fail due to missing regex escape

• [COMMANDBOX-1177] - Incorrect serverInfo for a server that hasn't started

New Feature

• [COMMANDBOX-1015] - Allow arbitrary actions for menu items

• [COMMANDBOX-1019] - Allow to start a pure HTML server

• [COMMANDBOX-1130] - Update ColdBox Templates to new standards

• [COMMANDBOX-1145] - Allow default working dir of box to be overridden

• [COMMANDBOX-1146] - Create box-thin binaries that don't bundle any libs

• [COMMANDBOX-1147] - Create CommandBox Light built that uses Lucee Light jar

• [COMMANDBOX-1153] - Add two new methods to commands for working with async futures: getCurrentThread() getThreadName()

• [COMMANDBOX-1170] - TestBox run commands now support the outputFormats argument to allow you to output post-test reports in many formats

• [COMMANDBOX-1171] - TestBox revamped UI for the CLI reporter

• [COMMANDBOX-1172] - Add Java info debug to box binary

Task

• [COMMANDBOX-1102] - Add Java version as info log

Improvement

• [COMMANDBOX-1080] - Provide way to disable server instance icon in MacOS dock

• [COMMANDBOX-1126] - Add --full flag to dir command to output full path

• [COMMANDBOX-1129] - Rework the server list command so it is more performant

• [COMMANDBOX-1132] - Bump to Lucee 5.3.6.61

• [COMMANDBOX-1134] - Tab complete for sort options in dir command

• [COMMANDBOX-1143] - Have the ProgressableDownloader send an Accept header

• [COMMANDBOX-1150] - Don't overwrite lucee-server.xml file when updating libs

• [COMMANDBOX-1155] - Auto-detect *unix distros with non-bash shells

• [COMMANDBOX-1156] - Copy lco files so Lucee server can start on CommandBox Light

• [COMMANDBOX-1168] - Reset console window title after `run` executes a process

There are a number of pretty exciting new features and a pile of bug fixes. And as usual, input from the community via Pull Requests. Huge thanks to Pete Freitag, Kai Koenig, Matthew Clemente, Bobby Hartsfield, Scott Steinbeck, Daniel Mejia, and Miguel Mathus! Here's an overview of the new stuff in 5.2.0

Library Updates

We know library updates are boring, but they are important and we want you to know we take them seriously. Keeping up-to-date ensure you have the latest fixes and security updates from all the third-party libs we bundle in CommandBox.

Here's an overview of what we updated in CommandBox 5.2.0.

• Upgraded Runwar from 4.1.2 to 4.3.8

• Upgraded JBoss Undertow from 2.0.27.Final to 2.2.0

• Upgraded UrlRewritesFilter to Ortus fork 5.0.1 with custom fixes

• Upgraded jboss-logging from 3.2.1.Final to 3.4.1.Final

• Upgraded jboss-logging-annotations from 2.1.0 to 2.2.1.Final

• Upgraded JCabi Log from 0.18 to 0.18.1

• Upgraded Apache HttpClient from 4.2.6 to 4.5.12

• Upgraded Apache httpmime from 4.2.6 to 4.5.12

• Removed unused JOpt Simple 5.0-beta-1

• Removed unused Gson 1.2.3

The Undertow bump is a minor update, but a pretty big deal. Ortus sent three pull requests to the core Undertow project fixing bugs and adding predicate logging. All of our pulls were accepted and merged into the core Undertow project and released in the 2.2 release.

Read more about library updates here:

https://ortussolutions.atlassian.net/browse/COMMANDBOX-1064

Server Security Profiles

This is a feature that we expect to grow in the future. We've started it out simple, yet powerful but left a lot of room to build on it. The two main goals here are

• Make CommandBox secure-by-default so a server shoved in production comes nice and locked down

• Makes it very easy for you to toggle off all the security stuff for development

CommandBox now has profiles you can assign to a server when you start it to configure the default settings. This is to provide easy secure-by-default setups for your production servers, and to make it easier to switch between a development mode and production mode.

There are 3 currently supported profiles. Custom profiles will be added as a future feature.

• Production - Locked down for production hosting

• Development - Lax security for local development

• None - For backwards compat and custom setups. Doesn't apply any web server rules

In production mode, CommandBox will block access to your CF admin to all external traffic, will block all common config files such as box.json or .env and will block, the "TRACK" and "TRACE" HTTP verbs

You can set the profile for your server in your server.json

server set profile=production

Or you can specify it when starting the server like so:

server start profile=production

If a profile is not set, CommandBox looks for an environment variable called "environment" or it checks to see if the site is bound on localhost to try and guess the correct profile for you.

We've also added some new flags in your server.json to fully customize how your profile behaves.

server set web.blockCFAdmin=true
server set web.blockCFAdmin=false
server set web.blockCFAdmin=external

server set web.blockSensitivePaths=true
server set web.blockSensitivePaths=false

server set web.blockFlashRemoting=true
server set web.blockFlashRemoting=false

‌Read more about Server Profiles here:

https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/server-profiles

Server Rules

This is huge-- probably the biggest chunk of work, and it's actually what makes the server profiles above even possible! It's always been possible to perform basic lock downs with a custom rewrite file, but we've exposed an amazing built-in functionality of Undertow called the Predicate language. It allows you to create ad-hoc rules that apply to your server to provide any of the following:

• Security - Block paths, IPs, or users

• URL rewrites - Rewrite incoming URLs to something different

• Modifying HTTP requests on the fly - Set headers, cookies, or response codes

An example of a server rule using Undertow's predicate language to block access to any box.json files looks like this:

path-suffix(/box.json) -> set-error(404)

One of the best things about these rules, is they don't have to be in a single monolithic XML file. Instead they can come from

• An array of ad-hoc definitions in your server.json file or config server defaults

• one or more external JSON or text file specified in your server.json or config server defaults

• Built in CommandBox server profiles (see above)

• Custom 3rd party CommandBox modules that contribute rules on-the-fly (time to get creative!)

Here's some examples of what can be in your server.json

{
    "web" : {
        "rules" : [
            "path-suffix(/box.json) -> set-error(404)",
            "path-suffix(hidden.js) -> set-error(404)",
            "path-prefix(/admin/) -> ip-access-control(192.168.0.* allow)",
            "path(/sitemap.xml) -> rewrite(/sitemap.cfm)",
	    "disallowed-methods(trace)"
        ],
	"rulesFile" : "../secure-rules.json"
        // Or...
	"rulesFile" : ["../security.json","../rewrites.txt","../app-headers.json"]
        // Or...
	"rulesFile" : "../rules/*.json"
    }
}

There are TON of built in predicates and handlers your rules can use. We've documented some of them here:

CommandBox also registers some custom rules in Undertow you can use for your CF apps:

// Block all CF admin access
cf-admin() -> set-error( 404 ); 

// Shortcut for the previous rule
block-cf-admin() 

// Block external CF admin access
cf-admin() -> block-external() 

There are lots of new docs on this. Read more about Server Rules here:

https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/server-rules

Task Runner Lifecyle events

The more we use Task Runners for builds, scheduled tasks, and utilities, we've seen the need to have lifecyle events in the same manner as the preHandler and postHandler sort of stuff in ColdBox MVC. Now if a task runner has methods of this name, they will be executed automatically.

• preTask - Before any target in the task

• postTask - After any target in the task

• aroundTask - Wraps execution of any target in the task

• pre- Before a specific target

• post- After a specific target

• around - Wraps execution of a specific target

• onComplete - Fires regardless of exit status

• onSuccess - Fires when task runs without failing exit code or exception

• onFail - Fires if exit code is failing after the action is done (always fires along with onError, but does not receive an exception object). Use this to respond generally to failures of the job.

• onError - fires only if an unhandled exception is thrown and receives exception object. Use this to respond to errors in the task. Does not fire for interrupted exceptions

• onCancel - Fires when the task is interrupted with Ctrl-C

The lifecycle methods are very powerful and can be controlled via whitelist and blacklists to control what targets they execute for. "Around" events are very easy to use thanks to the use of closure. There's a lot more details in the docs.

Read more about Task Runner Lifecyle events here:

https://commandbox.ortusbooks.com/task-runners/lifecycle-events

System Setting ${} Namespaces

The default namespace when using the $ {foo} system setting expansion syntax is box environment variable, Java system properties, and OS environment variables.

It is also possible to leverage built-in namespaces to allow expansions that reference:

• server.json properties

• box.json properties

• arbitrary JSON file properties

• Config settings (like the config show command)

• Server info properties (like the server info property=name command)

• Other properties in the same JSON file

This gives you a lot more power now to be able to create dynamic configuration in your JSON files and even from the command line. Here are some examples:

// Reference box.json file in this directory
$ {boxjson.slug}

// Reference server.json file in this directory
$ serverjson.web.http.port:80}

// Reference local server details 
$ {serverinfo.serverHomeDirectory}

// Reference arbitrary JSON file
$ {json.myProperty@file.json}

// Reference CLI's config settings
$ {configsetting.endpoints.forgebox.apitoken}

// Local reference to a JSON property in the same file
{
    "appFileGlobs" : "models/**/*.cfc,tests/specs/**/*.cfc",
    "scripts":{
        "format":"cfformat run $ {@appFileGlobs} --overwrite",
        "format:check":"cfformat check $ {@appFileGlobs} --verbose"
    }
}

And one of the coolest things is this implementation is driven by a new onSystemSettingExpansion interception point and completely extendable! That means you can write a module that powers something hypothetical like this:

$ {AWSSecretStore.mySecretKey}

Read more about System Setting namespaces here:

https://commandbox.ortusbooks.com/usage/system-setting-expansion-namespaces

GZip Compression Control

CommandBox has had the ability to enable/disable GZip compression in Undertow for a while. Now you can fully control when it activates based on the type or size of file, etc. This feature utilizes the same Undertow predicate language that we introduced above.

server set web.gzipEnable=true
server set web.gzipPredicate="not path-prefix( admin ) and regex( '(.*).css' ) and request-larger-than(500)"

Read more about GZip Compression Control here:

https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/gzip-compression

Generic Watch Command

This is a fun one. There are some specific commands that make use of the Watcher library in CommandBox such as testbox watch and coldbox watch-reinit. However, there is also now a generic watch command that will run any arbitrary command of your choosing when a path matching your file globbing pattern is added/updated/deleted. Use this to build custom watchers on-the-fly without needing to touch any CFML code to write a Task Runner.

watch *.json "echo 'config file updated!'"

That command will echo out "config files updated!" every time a JSON file gets changed in the current directory. Here's a more complex one:

set command = "echo 'You added \$ {item}!'"
watch command="foreach '\$ {watcher_added}' \$ {command}" --verbose

That one will list every new file that's added in this directory and all sub directories.

Read more about the generic watch command here:

https://commandbox.ortusbooks.com/usage/watch-command

Control Default Browser

There are a handful of features in CommandBox that will open URLs for you in your default browser. We've had requests to allow the browser in use to be customized, so we've reworked all of that logic, consolidating it in some places and now you can control what browser CommandBox uses. To change the default browser for all URL opening functions use this:

// use Chrome
config set preferredBrowser=chrome

// use FireFox
config set preferredBrowser=frefox

// Just kidding, no one is going to use this!!
config set preferredBrowser=ie

Supported browsers are:

• firefox

• chrome

• opera

• edge (Windows and Mac only)

• ie (Windows only)

• safari (Mac only)

• konqueror (Linux only)

• epiphany (Linux only)

And you can even dial in a browser on demand for the browse and server open commands.

server open browser=opera

Read more about setting the default browser here:

https://commandbox.ortusbooks.com/config-settings/misc-settings#preferredbrowser

Miscellaneous

Here are some honorable mentions.

.htaccess rewrite flags

The CommandBox Tuckey rewrites allow an .htaccess file that uses the mod_rewrite style syntax of rewrites. Previously, use of flags such as these didn't work:L

RewriteRule ^/login.cfm$ /condworks.html [R=301]

https://ortussolutions.atlassian.net/browse/COMMANDBOX-1221

Server restart from tray icon

We've added a "restart" option to the tray icon that does exactly what you think it does.

Trick for "cd"ing up directories

There's a new trick supported in CommandBox's shell that we've borrowed that allows you to change directories and go "up" more than one directory with less typing:

// current directory
cd .   -> ./
// back 1 directory
cd ..  -> ../
// back 2 directories
cd ... -> cd ../../
// back 3 directories
cd .... -> cd ../../../ 

https://ortussolutions.atlassian.net/browse/COMMANDBOX-1209

Pipe into standard input of native binaries

You can now pipe the output of a previous command in CommandBox directly to a native binary like so:

#createguid | !clip
or
#createguid | run clip

In this case, clip is a Windows binary that will read the standard input and place that text on the clipboard.

https://commandbox.ortusbooks.com/usage/execution/os-binaries#piping-to-the-native-binarys-standard-input

Breaking Changes

We work hard to make every CommandBox upgrade backwards compatible. There's a couple things that you may notice different in this release. They're both done to put security first and can be modified to get your original behavior back.

Since the CF Administrator is now blocked for traffic not coming from localhost when in production mode, you may need to explicitly open up the CF admin to make it accessible again if you needed it open to the public on a production server. Even with the profile set to production, you can activate just the CF admin like so:

server set web.blockCFAdmin=false

The web server built into CommandBox will now only serve static files if their extension is found in a whitelist of acceptable files. This is to prevent prying eyes from hitting files they shouldn't be able to access on your server. The current list of valid extensions is:

3gp,3gpp,7z,ai,aif,aiff,asf,asx,atom,au,avi,bin,bmp,btm,cco,crt,css,csv,deb,der,dmg,doc,docx,eot,eps,flv,font,gif,hqx,htc,htm,html,ico,img,ini,iso,jad,jng,jnlp,jpeg,jpg,js,json,kar,kml,kmz,m3u8,m4a,m4v,map,mid,midi,mml,mng,mov,mp3,mp4,mpeg,mpeg4,mpg,msi,msm,msp,ogg,otf,pdb,pdf,pem,pl,pm,png,ppt,pptx,prc,ps,psd,ra,rar,rpm,rss,rtf,run,sea,shtml,sit,svg,svgz,swf,tar,tcl,tif,tiff,tk,ts,ttf,txt,wav,wbmp,webm,webp,wmf,wml,wmlc,wmv,woff,woff2,xhtml,xls,xlsx,xml,xpi,xspf,zip,aifc,aac,apk,bak,bk,bz2,cdr,cmx,dat,dtd,eml,fla,gz,gzip,ipa,ia,indd,hey,lz,maf,markdown,md,mkv,mp1,mp2,mpe,odt,ott,odg,odf,ots,pps,pot,pmd,pub,raw,sdd,tsv,xcf,yml,yaml

If you have a common static file you need to serve, you can add your own custom extensions to the list like so:

server set web.allowedExt=jar,exe,dll

And if you think we've missed an obvious one that deserves to be added to the default list, please let us know.

Release Notes

Here's the full list of tickets in the 5.2.0-RC.1 release.

Bug

• [COMMANDBOX-1138] - Tuckey UrlRewrite DTD version issues

• [COMMANDBOX-1141] - when installing a package which doesn't exist, commandbox claims forgebox is unreachable

• [COMMANDBOX-1199] - Remove mail-4.1.1.jar from runwar's lib dir

• [COMMANDBOX-1201] - "testbox run" output garbled on Windows (wrong encoding)

• [COMMANDBOX-1205] - UndertowOptions and XNIOOptions don't work for Long type

• [COMMANDBOX-1206] - HTTP endpoint leaves a zip file in the CommandBox temp folder

• [COMMANDBOX-1213] - url rewrite no longer works

• [COMMANDBOX-1218] - Piping a command into run does not execute interactivley

• [COMMANDBOX-1221] - Support flags on .htaccess file for Tuckey rewrites

New Feature

• [COMMANDBOX-126] - Restart server via tray icon

• [COMMANDBOX-1012] - Stop expanding /WEB-INF paths in servlet init params

• [COMMANDBOX-1021] - Allow configuring default browser to use when opening a URL

• [COMMANDBOX-1084] - Add a preInstallAll and postInstallAll interception points when running an `install` command

• [COMMANDBOX-1167] - Add Task Runner lifecycle events

• [COMMANDBOX-1197] - Generic watch command

• [COMMANDBOX-1200] - When starting an already-started server, offer to open the existing one instead

• [COMMANDBOX-1209] - Add directory expansion command for going back multiple directories

• [COMMANDBOX-1214] - Add built-in predicates and handlers for undertow for easier lockdown

• [COMMANDBOX-1215] - Add "profile" setting to help default security settings

• [COMMANDBOX-1220] - Allow standard input to be piped to native binaries

Task

• [COMMANDBOX-1064] - review all the runwar dependencies and check for outdated ones

Improvement

• [COMMANDBOX-1044] - Block TRACE HTTP Verb by default

• [COMMANDBOX-1094] - Implement web server rules in Undertow

• [COMMANDBOX-1103] - Add an option to console log output without ANSI codes

• [COMMANDBOX-1109] - Migrate to AdoptOpenJDK API v3

• [COMMANDBOX-1131] - Move ANSI logging format from Runwar to CommandBox

• [COMMANDBOX-1157] - Automated flag negation hint is the same as the hint for the flag itself

• [COMMANDBOX-1182] - Default server menu actions working directory to web root

• [COMMANDBOX-1183] - Expand working directory when specified for a menu item

• [COMMANDBOX-1191] - Validate incoming version for bump command

• [COMMANDBOX-1192] - Programmatic skipping of package install via interceptor

• [COMMANDBOX-1193] - Adding support for installing lex files from file or unc paths

• [COMMANDBOX-1195] - Add File Filtering For GZIP Compression

• [COMMANDBOX-1196] - Allow default server java version to be cleared

• [COMMANDBOX-1198] - Add setSystemSetting() to BaseCommand

• [COMMANDBOX-1202] - "testbox run" command - show tag context for global bundle exceptions

• [COMMANDBOX-1203] - Add --trayEnable flag to server start

• [COMMANDBOX-1204] - Allow ${} system setting expansions to have extendable namespaces

• [COMMANDBOX-1208] - Improve verbose output of JVM args if args contain " - " in them

• [COMMANDBOX-1217] - forgeboxstorage default ignores are over-aggresive

• [COMMANDBOX-1219] - If native command is piped into RUN, allow the output to be piped again

Sub-task

• [COMMANDBOX-1185] - Load predicates in Runwar

• [COMMANDBOX-1186] - Pass Predicates as part of Server Start in CommandBox

• [COMMANDBOX-1187] - Add default server rules/predicates in CommandBox for default lockdown

• [COMMANDBOX-1188] - Improve logging in Undertow for execution of predicate handlers

• [COMMANDBOX-1189] - Track/address Undertow tickets

Override Config Settings via Env Vars

Every Config Setting can be overridden by convention by creating environment variables in the shell where you run box. This is ideal for CI builds where you want to easily set ForgeBox API keys, or tweak settings for your build.

box_config_endpoints_forgebox_APIToken=my-token-here

# JSON which will be parsed
box_config_proxy={ "server" : "localhost", "port": 80 }

# dot-delimited keys (windows only)
box_config_endpoints.forgebox.APIToken=my-token-here

# array indexes too (windows only)
box_config_foo.bar[baz].bum[1]=test

More Info: https://commandbox.ortusbooks.com/config-settings/env-var-overrides

Override Server Settings via Env Vars

Every server setting can be overridden by convention by creating environment variables in the shell where you run box. This is ideal for CI builds where you want to easily set ports, or tweak settings for your build.

box_server_profile=production

box_server_web_http_port=8080

# JSON which will be parsed
box_server_web_ssl={ "enabled" : true, "port": 443 }

# dot-delimited keys (Windows only)
box_server_web.http.port=8080

# array indexes too (Windows only)
box_server_web_rules[1]=path-suffix(/box.json) -> set-error(404)
box_server_web_rules[2]=disallowed-methods(trace)

More Info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/env-var-overrides

HTTP/2 Support

CommandBox now has out-of-the-box support for the HTTP/2 protocol. It is always enabled by default and browsers will use it when you're serving over HTTPS.

server set web.http2.enable=true/false

More Info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/server-port-and-host#http-2

JMES JSON filtering / jq Command

Thanks to a massive effort from Scott Steinbeck, the CFML world has a new CF implementation of the JMES spec, which is what powers the popular "jq" (or JSON Query) bash command. We've plugged this new library into CommandBox and exposed it in the following ways.

We've added a new jq command which behaves roughly like the bash counterpart. You can pipe in JSON, or read the JSON from a file and apply a JSON query against it which can be used to filter, massage, rewrite, map, or filter the JSON into a new JSON object.

# Return array of dependency names
package show | jq keys(dependencies)

# Find dependencies with "cb" in their name
package show | jq key_contains(dependencies,'cb')

We've also added the ability to specify powerful jq filters to the "package show", "server show", and "config show" commands directly. Just prefix your filter with the text "jq:" like so:

config show jq:endpoints.forgebox.apiToken
# .. is the same as ...
config show endpoints.forgebox.apiToken

# or you can get fancy...
config show 'jq:keys(modules)'

# Impress your friends
package show "jq:[name,version]"

# Be the life of the party
package show "jq:contributors|split(@,' ')" 

The jq command and JMES spec are very powerful and probably do much more than you realize! Make sure you check out the docs for more ideas.

More Info: https://commandbox.ortusbooks.com/usage/jq-command

AJP Secret Support

CommandBox's AJP listener (provided by Undertow) is already protected against the Ghostcat vulnerability. However, if you would like to set up an AJP secret as well to ensure all requests coming into the AJP listener are from a trusted source, you can do this by setting the web.ajp.secret property.

server set web.AJP.secret=mySecret

For this to work, you must also configure your AJP proxy in your web server to send the same secret!

More info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/server-port-and-host#ajp-secret

AsyncManager Available to Task Runners and Commands

We've updated the version of WireBox inside the CLI and now have access to the AsyncManager for sweet threading and scheduled task support.

// Parallel Executions
async().all(
    () => hyper.post( "/somewhere" ),
    () => hyper.post( "/somewhereElse" ),
    () => hyper.post( "/another" )
).then( (results)=> logResults( results ) );

CommandBox is using an AsyncManager scheduled task thread now to redraw interactive jobs and progress bars. Look out for some new eye candy hiding in your server starts and package installs!

More Info: https://commandbox.ortusbooks.com/task-runners/threading-async#asyncmanager

New Table Printer

The print helper in commands and Task Runners has a new toy that will print ASCII representations of tabular data thanks to a pull request from Eric Peterson. You can see it in the output of the outdated command.

And you can use it in your Task Runners like so:

print.table(
	[ 'First Name', 'Last Name' ],
	[
		[ 'Brad', 'Wood' ],
		[ 'Luis', 'Majano' ],
		[ 'Gavin', 'Pickin' ]
	]
);

ColdBox Scaffolding for REST Handlers

When scaffolding ColdBox handlers, we have support for ColdBox 6.x REST Handlers now.

coldbox create handler --rest

Experimental Server Features

You can enable extra Resource Manager Logging when troubleshooting file system issues:

server set runwar.args="--resource-manager-logging=true"

You can force case sensitivity on a Windows server:

server set runwar.args="--case-sensitive-web-server=true"

You can force case Insensitivity on a Linux server:

server set runwar.args="--case-sensitive-web-server=false"

You can enable a cache of file system lookups of servlet paths. This is only for production and will eliminate repeated file system hits by your CF engine, such as checking for an Application.cfc file on every request, or testing where the servlet context root is. Standard Adobe ColdFusion installations have a similar cache of "real" paths from the servlet context that is tied to a setting in the administrator called "Cache Webserver paths" but that setting is not available and does not work on CommandBox servers for some reason. This setting would apply to any CF engine.

server set runwar.args="--cache-servlet-paths=true"

More Info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/experimental-features

HTTPS Redirect/HSTS

When using a CommandBox web server in production, you may wish to force your users to visit your site over HTTPS for security (and for HTTP/2 to work). However, it is desirable to still have your web server listening on HTTP so a user just typing your address in his browser can still connect to HTTP and then redirect. CommandBox can be configured to redirect all HTTP traffic over to HTTPS with the following setting.

server set web.SSL.forceSSLRedirect=true

If you want to go one step further, you can add a Strict-Transport-Security header to your site. This instructs the browser to automatically use HTTPS every time the user visits your site again.

server set web.SSL.HSTS.enable=true
server set web.SSL.HSTS.maxAge=31536000
server set web.SSL.HSTS.includeSubDomains=true

More Info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/https-redirect-hsts

Force Colored Output in your Builds

CommandBox won't use ANSI color formatting when running inside of a non-interactive terminal. However, build servers such as Gitlab or Jenkins (via a plugin) support ANSI color sequences. You can force CommandBox to use colored text output with this new setting:

config set colorInDumbTerminal=true

Loose Semantic Version Parsing

One of the common hangups for people dealing with Lucee Server and Adobe ColdFusion CF Engines versions, is that CommandBox follows the npm-flavor of the semantic version spec and expects

server start cfengine=lucee@5.3.7+48

instead of

server start cfengine=lucee@5.3.7.48

So we've loosened our sem ver library to treat the 4th number as a build ID if there is no plus sign in the version (instead of just discarding the 4th digit as the spec requires)

Support for "localhost subdomains"

Most modern browsers allow you to make up any subdomain you want before localhost such as mySite.localhost and will simply resolve them to localhost (127.0.0.1) even without a hosts file entry. CommandBox now supports using these domains and will bind your server's ports to localhost even without using the commandbox-hostupdater module.

server set web.host=mySite.localhost

More Info: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/server-port-and-host#a-gracious-host

Relative CommandBox home

You can customize where CommandBox lives by placing a commandbox.properties file next to the box binary. We have better support for relative paths now so you can have portable CommandBox installations such as a thumb drive.

commandbox_home=../customHome

More Info: https://commandbox.ortusbooks.com/setup/installation

Halt Server If Port In Use (Breaking Change)

The only known breaking change in this release is if you try to start two servers on the same HTTP port. Previously, CommandBox would just ignore the port on the second server and choose a random port. Due to the confusion that can cause, CommandBox will now throw an error. If you want to override an explicit port locally, set the port to an empty string or a 0 and CommandBox will choose a random port for you. For example, if you are using the commandbox-dotenv module, you can put this line in your project's .env file to override the port in your server.json

box_server_web_http_port=0

Relative Web Alias Behavior (regression)

If you have a server with the server.json outside of the web root and at least one relative web alias, the alias will not work on the first start of the server. The workaround is to change the web aliases to be relative to the folder that the server.json lives in.

Incompatibility with old DotEnv module

Some users receive the following error when starting CommandBox after updating:

The parameter [name] to function [get] is required but was not passed in.

If you see this, it means you have an older version of the commandbox-dotenv module installed that is not compatible with the new version of WireBox inside CommandBox. To fix, delete this folder out of your CommandBox home:

~/.CommandBox/cfml/modules/commandbox-dotenv

Now the CLI will start and you can install the latest version of dotenv.

install commandbox-dotenv

Release notes

Here is the list of all tickets included in the 5.3.0 release.

Bug

COMMANDBOX-1301 web server aliases in server.json should be relative to the folder of the server.json

COMMANDBOX-1300 ${Setting: serverinfo.foo not found} expansions don't work in a folder that's not the web root

COMMANDBOX-1291 Re-using same server.json with two names doesn't work

COMMANDBOX-1276 Corrupted WireBox metadata cache file will prevent CommandBox from starting

COMMANDBOX-1275 HTTP2 Additional Port Handling and Flexibility

COMMANDBOX-1271 REPL & Command highlighters don't handle square brackets [] well

COMMANDBOX-1270 JVM arg ending in backslash doesn't work

COMMANDBOX-1268 Coldbox Watch-Reinit Watches Unwanted Folders

COMMANDBOX-1263 Package installation doesn't always optimize duplicate packages

COMMANDBOX-1261 Globber.count() bombs if run after .asQuery()

COMMANDBOX-1259 Starting lucee@1.2.3 will use light-light when using CommandBox Light

COMMANDBOX-1255 Loading class files in task runner doesn't work

COMMANDBOX-1253 variables scope doesn't persist between task dependencies

COMMANDBOX-1250 tokenreplace removes BOM from files

COMMANDBOX-1212 trayOptions.json not respecting serverHomeDirectory

COMMANDBOX-664 Server status not always correct.

Improvement

COMMANDBOX-1297 Add singleServerHome option to not auto-deploy different versions of servers

COMMANDBOX-1296 Improve error message if version isn't found in ForgeBox

COMMANDBOX-1295 Loosen parsing of build ID in semver

COMMANDBOX-1292 Treat empty HTTP port the same as 0 (chooses random port)

COMMANDBOX-1290 Remove runwar hack that sets java vesrion

COMMANDBOX-1288 Runwar timesout when Lucee's new warmup flag is used

COMMANDBOX-1287 Add option for PID file

COMMANDBOX-1285 Allow generic override of server start settings via env vars or java sys props

COMMANDBOX-1284 Have parser ignore quotes inside a token

COMMANDBOX-1269 Cache "/" path lookup in Runwar's mapped resource manager

COMMANDBOX-1267 Add setters for run() arguments in CommandDSL

COMMANDBOX-1258 Default embedded server only needs to copy lucee.jar

COMMANDBOX-1256 Have outdated also show latest version of a package

COMMANDBOX-1252 Integrate AsyncManager into CommandBox

COMMANDBOX-1251 Upgrade to latest WireBox 6.x

COMMANDBOX-1249 Bundle testbox in testbox module to prevent auto download

COMMANDBOX-1248 Halt server start if asked for port is in use

COMMANDBOX-1246 the git bullet train car disappears while current working directory is not the root project folder

COMMANDBOX-1216 Support AJP secret in Undertow

COMMANDBOX-1169 Rethink the way the screen is redrawn upon extensive installs so it can be fluent on all screen sizes

COMMANDBOX-1136 Can't link package if no modules are installed

COMMANDBOX-1117 New first-class setting to enable HTTP2

COMMANDBOX-1108 Comment out the default environment vars in .env when createing a new coldbox app

New Feature

COMMANDBOX-1294 Allow server rules to be commented out with #

COMMANDBOX-1293 Allow servers to use random.localhost domains

COMMANDBOX-1289 Integrate JMES JSON filtering

COMMANDBOX-1282 Debug when lucee-extensions don't find Lucee server

COMMANDBOX-1281 Allow JSON service to create implicit arrays

COMMANDBOX-1280 Add config setting to enable ANSI colors in dumb terminals

COMMANDBOX-1279 Allow generic override of config settings via env vars or java sys props

COMMANDBOX-1278 Add --json flag to server list

COMMANDBOX-1277 Add HTTP redirect options

COMMANDBOX-1273 Add optional servlet path cache in Runwar

COMMANDBOX-1262 Allow caching of task runners

COMMANDBOX-1260 Support for generating ColdBox RESTHandlers

COMMANDBOX-1245 Support default module export as @moduleName,

COMMANDBOX-676 Allow commandbox_home to be relative

Upgrade Compatibility

Even though this is a new major version, it should be very backwards compatible. CommandBox proper has no known backwards compatibility issues we're aware of, but note we've bumped libraries like Lucee Server, Undertow, and Java support, so you may notice differences due to these 3rd party lib updates. For example, one breaking change in Lucee 5.3 (which now powers your default server) is how page output buffer is handled.

You should be able to simply replace your box.exe binary and run it to get the same in-place upgrade you're used to. If you run into issue, you can try removing the "engine" folder in your ~/.CommandBox folder and try again. If you need to downgrade for any reason, replace the box binary with the old version, remove the "engine", "cfml", and "lib" folders in your CommandBox home and they will get re-created on the next run.

You may also notice the box binary is larger now. From 44 Megs up to 77 Megs. This is a regrettable byproduct of us turning off the Pack200 process we used to run against the Lucee jar. Lucee seems to have some bugs that causes it to re-download a bunch of OSGI bundles when we compress them and we can't figure it out, or get support on the matter, so for now we're just not compressing as much stuff. This was a huge blocker for anyone needing to run CommandBox on a PC with no external internet access as Lucee provides no mechanism to turn off it's auto-download behavior.

And finally, if you have installed any custom OSGI bundles into your CLI, they will be wiped by the upgrade process now. We didn't want to have to to do this, but Lucee has bugs that cause errors when doing in-place upgrades with the old OSGI bundles left in place and we couldn't get it fixed, so this was the only way to ensure in-place upgrades would "just work" without errors. We are leaving the Lucee engine folder, so any settings you may have put into your CLI should remain in place.

What's New?

There's a lot of new stuff in CommandBox 5.0.0. Here's an overview. One of the biggest new "features" is you can finally use CommandBox on Java 11+. This was not possible in CommandBox 4.x due to the version of Lucee not fully supporting newer versions of Java. Now that Lucee has been bumped to 5.3 (see below) you are free to leave java 8 behind for the CLI. Note if you're using CommandBox to start up older versions of Adobe CF or Lucee/Railo, you may still need to use java 8 specifically for your servers.

New Libraries

Let's start with the library updates. For the most part, all the jars we bundle are a "black box" but in reality, every update is usually for new features, fixes, or security patches. Here's an overview of the new libs:

• WireBox 5.6.2

• JLine 3.13.0

• Runwar 4.0.3 (major bump from 3.x)

• JBoss Undertow 2.0.27.Final (major bump from 1.x)

• JGit 5.5.1.201910021850-r

• Lucee 5.3.4.77("major" bump from 5.2)

• AdoptOpenJDK jdk-11.0.6+10 (In the JRE-included download) (major bump from 8.x)

New Features/Enhancements

You can now use user/pass or personal access token authentication when cloning Git repos over HTTPS. This has been tested with Github and Gitlab and is an alternative to SSH keys. Please check the docs, as Github and Gitlab both expect slightly different inputs.

install git+https://username:password@domain.com/user/repo.git
or
install git+https://AccessTokenHere@github.com/user/repo.git

There is a new Lex installation endpoint to help you acquire Lucee Extensions your app needs via the "install" command or a dependency in your box.json file. If the current directory has a Lucee server in it, CommandBox will install the extension file directly into your server's "deploy" folder (server context)

install lex:https://downloads.ortussolutions.com/ortussolutions/lucee-extensions/ortus-redis-cache/1.4.0/ortus-redis-cache-1.4.0.lex

The auto-install feature into your server will work on any Lex package, even one coming from ForgeBox:

// ForgeBox slug for Ortus Redis Extension
install 5C558CC6-1E67-4776-96A60F9726D580F1

Tuning your server is easier now. You can configure your Undertow worker-threads setting with first-class server.json property

server set web.maxRequests=200

Which gives you this in your server.json

{
  "web" : {
    "maxRequests" : 200
  }
}

We've also unlocked a method for you to set ANY valid Undertow option or XNIO option. So if Undertow supports it, you can configure it!

server set runwar.undertowOptions.ALLOW_UNESCAPED_CHARACTERS_IN_URL=true

server set runwar.XNIOOptions.WORKER_NAME=myWorker

We've added a new experimental feature that lets you create a batch file, powershell script, or bash shell script that directly starts a server with the exact settings that you get from "server start". This is for you to create super-optimzed startups in Docker or Service that bypass the CLI steps and "lock in" the settings. No server.json or CFConfig, or dotenv code will be processed, but you will have a fast streamlined start that is the same every time. Couple this with our new "dryRun" flag on server start that will unpack the CF engine, but not actually start the server, and you can create your customs start script like so:

server start --console --dryRun startScript=bash startScriptFile=startmebaby.sh

// Later directly from bash...

./startmebaby.sh

The Globber helper can now take more than one globbing pattern. This also means every built-in command in CommandBox that takes a globbing pattern, can now take a comma delimited list of patterns. We've also added an exclude list of globbing patterns to the dir command as well.

dir **.cfc,*.cfm
dir paths=modules excludePath=**.md --recurse
dir paths=samples sort="directory asc, name desc"

We've got a couple new handy commands to help you from the command line, "unique" (modeled after the Bash "uniq" command)

cat names.txt | unique
cat names.txt | unique --count

And "sort" (modeled after the Bash "sort" command)

cat names.txt | sort
cat names.txt | sort type=text
cat names.txt | sort type=numeric
cat names.txt | sort direction=desc

The "grep" command has received a "count" parameter if you just want the count of lines that match the regex (or no regex will count all lines)

dir **.cfc | grep --count

dir | grep .*\.md --count

The tray icon for your servers now has a new option under the "Open" menu that will open up the file system folder where the server home lives. This is nice for finding your CF Engine's log files.

Release Notes

There are a lot of bug fixes and even more enhancements I didn't cover above. You can read the full release notes here:

Sub-task

• [COMMANDBOX-1069] - Remove extra stashes on url paths when servlet init params starts with WEB-INF

Bug

• [COMMANDBOX-643] - Tray Icon not displaying on Debian8

• [COMMANDBOX-711] - X Window Errors

• [COMMANDBOX-812] - "Coldbox create resource" uses wrong paths on Windows

• [COMMANDBOX-941] - urlrewrite.xml has file size of 0 on docker restart but not regular start

• [COMMANDBOX-946] - CommandBox instances crashing because of TrayIcon rendering

• [COMMANDBOX-975] - CommandBox always reads STDIN even when in non-interactive mode

• [COMMANDBOX-980] - Using zsh exits out of CommandBox when running a binary command

• [COMMANDBOX-992] - Shebang scripts no longer work without .cfm extension

• [COMMANDBOX-1005] - If custom rewrite file is already in correct destination, runwar overwrites it as 0 bytes

• [COMMANDBOX-1008] - worker-threads setting no longer has any affect

• [COMMANDBOX-1009] - Tray icon not showing in Ubuntu 18.04

• [COMMANDBOX-1013] - Undertow error output when starting server

• [COMMANDBOX-1014] - [RUNWAR] Tray menu placeholders such as ${Setting: runwar.port not found} are not replaced in sub menus

• [COMMANDBOX-1022] - regex string index out of bounds exception

• [COMMANDBOX-1035] - URL Rewrites fire incorrect on URL containing a space

• [COMMANDBOX-1036] - Browser doesn't open when server start

• [COMMANDBOX-1037] - Host updater does not work

• [COMMANDBOX-1038] - Server doesn't stop on Windows

• [COMMANDBOX-1043] - ConcurrentModificationException with undertow?

• [COMMANDBOX-1048] - Restrict /dumprunwarrequest to be used only on Unit Testing

• [COMMANDBOX-1050] - Remove trailing slash from Adobe updates path

• [COMMANDBOX-1054] - Default command parameters don't work on commands in namespaces

• [COMMANDBOX-1061] - Command DSL has unexpected behavior with equals sign in positional tokens

• [COMMANDBOX-1062] - Tab complete for negated flags isn't complete

• [COMMANDBOX-1063] - box fails to open in vSphere Web Client console due to outdated JLine jar

• [COMMANDBOX-1068] - Server start doesn't correctly expand relative Java Home directory

• [COMMANDBOX-1070] - slashes into the servlet init param paths

• [COMMANDBOX-1071] - Tray icon doesn't disappear on Windows when server stops from CLI

• [COMMANDBOX-1076] - Install dependency from box.json with env var placeholder gets overwritten with actual value

• [COMMANDBOX-1077] - coldbox create resource command ignores specsDirectory argument

• [COMMANDBOX-1079] - foreach cannot be interrupted with Ctrl-C

• [COMMANDBOX-1081] - validate non-numeric exit codes from the "exit" command

• [COMMANDBOX-1089] - Task Runner's loadModule() fails on path with period

• [COMMANDBOX-1090] - Tasks don't treat return 1 and setExitCode( 1 ) the same

• [COMMANDBOX-1091] - When a task sets a failing exit code, no output is sent to console

• [COMMANDBOX-1092] - Commands that set a failing exit code don't raise proper exception

• [COMMANDBOX-1098] - foreach, grep, and sed only break on chr(10)

New Feature

• [COMMANDBOX-148] - Ability to install/uninstall box server services

• [COMMANDBOX-715] - Server command to explode server war but not start it

• [COMMANDBOX-1007] - Set any valid XNIO option

• [COMMANDBOX-1018] - Add generic feature to set any valid Undertow option

• [COMMANDBOX-1028] - Allow no rest mappings to be supplied

• [COMMANDBOX-1032] - Tab completion for task targets

• [COMMANDBOX-1052] - New TestBox commands: generate visualizer and generate browser

• [COMMANDBOX-1053] - Update ColdBox module templates for 5.0 standards

• [COMMANDBOX-1067] - Expose Undertow worker-threads setting with first-class server.json property

• [COMMANDBOX-1075] - Support HTTPS username/password auth

• [COMMANDBOX-1083] - Option for server start to write file with full start args for direct Runwar call

• [COMMANDBOX-1088] - Add lex endpoint for installing Lucee extensions

• [COMMANDBOX-1096] - Add unique command to filter out duplicates rows of input

• [COMMANDBOX-1097] - Add sort command to sort rows of input

Task

• [COMMANDBOX-964] - Make sure the build works

• [COMMANDBOX-965] - Document Setup in the Repo

• [COMMANDBOX-995] - Vet all changes on Runwar since April 25, 2018.

Improvement

• [COMMANDBOX-885] - Enhance Globber to take more than one pattern

• [COMMANDBOX-886] - Enhance Globber to have exclude patterns

• [COMMANDBOX-963] - Update CLI to Lucee 5.3 and test Java 11

• [COMMANDBOX-1029] - Change CommandBox build to pull Ortus build of Runwar

• [COMMANDBOX-1049] - Output Runwar version and jar path in "info" command output

• [COMMANDBOX-1055] - Need Config for Max Thread Request at runwar

• [COMMANDBOX-1057] - Enhance dir command with new Globber features

• [COMMANDBOX-1058] - Optimize installation of packages with createPackageDirectory set to false

• [COMMANDBOX-1059] - Improve performance of print buffer by using String Builder internally

• [COMMANDBOX-1060] - Add --count flag to grep command

• [COMMANDBOX-1065] - Update CommandBox to Runwar 4.0.0

• [COMMANDBOX-1066] - Upgrade to JGit 5.5

• [COMMANDBOX-1074] - Tie into FusionReactor to report transactions for tasks, commands, etc.

• [COMMANDBOX-1086] - Default location to forgeboxStorage for package init command

• [COMMANDBOX-1087] - Improve default package naming of jar endpoint

• [COMMANDBOX-1093] - Add option to tray menu to open server home directory

• [COMMANDBOX-1095] - Update to latest WireBox

• [COMMANDBOX-1099] - Stop outputting extra line break for commands with no output

There is now a new "forgebox logout" command you can use for testing or just to remove your API token from the local CLI.

# Logout one user
forgebox logout username

# logout all users
forgebox logout

You can change CommandBox's default tab completion to be an inline list that follows your cursor. This setting requires you to close and re-open the shell to take affect.

config set tabCompleteInline=true

Read more here:

https://commandbox.ortusbooks.com/config-settings/misc-settings#tabcompleteinline

We've added better debugging information for Server Profiles. If you add the --verbose flag to your server start, you'll be able to see what profile was detected for your server, and what baked-in rules have been turned on as a result.

|------------------------------
   | √ | Setting Server Profile to [development]
   |   |------------------------------------------------------
   |   | Profile set from "environment" env var
   |   | Block CF Admin disabled
   |   | Block Sensitive Paths enabled
   |   | Block Flash Remoting enabled
   |   | Directory Browsing enabled
   |   |------------------------------------------------------

We've added a new Single Server Mode you can enable in the CLI to make using CommandBox in Docker images easier.

Read more here:

https://commandbox.ortusbooks.com/embedded-server/single-server-mode

Release Notes

Here are the release notes for the 5.2.1 release.

Bug

• [COMMANDBOX-1231] - Installing via lex endpoint uses incorrect file extension

• [COMMANDBOX-1232] - Location of predicate file is in a folder that the Docker finalization script deletes

• [COMMANDBOX-1238] - Command alas for run command doesn't expand properly

New Feature

• [COMMANDBOX-1237] - Add config setting to activate JLine's AUTO_MENU_LIST

• [COMMANDBOX-1240] - forgebox logout command

Improvement

• [COMMANDBOX-1227] - verbose server start output for profile and security settings

• [COMMANDBOX-1228] - Extend ${} scopes to apply to any getSetting() call or "env show" command

• [COMMANDBOX-1229] - Modules aren't unloaded on reload or shutdown

• [COMMANDBOX-1233] - Add debug output that shows location of commandbox.properties file on start

• [COMMANDBOX-1234] - Add single server mode for CommandBox in a Docker container

• [COMMANDBOX-1236] - Add Testbox runner to sensitive paths in production profile

• [COMMANDBOX-1241] - Use UTF-8 when reading files with "cat" command

Release Notes

Bug

• [] - Server commands can have huge delay on Windows

• [] - List artifacts alphabetically.

• [] - /usr/bin/open on Linux

• [] - Errors in command CFCs can cause box to exit completely during tab complete

• [] - Running native binary that returns lots of text can perform poorly

• [] - Interceptor service blows up if you register a module with an interceptor not matching any current states

• [] - Allow modules to register an interceptor with no currently valid states

• [] - Catch errors from desktop.isDesktopSupported()

New Feature

• [] - Allow system setting (env var) expansions in REPL

• [] - Improve task DSL to allow access to exit code

• [] - Add config setting to debug raw native command being used in the "run" command

Improvement

In this section you will find the release notes for the 4.x version of CommandBox.

• - Sept 2019

• - June 2019

• - Mar 2019

• - Dec 2018

• - Nov 2018

• - Oct 2018

• - Aug 2018

• - Jun 2018

• - Jun 2018

Iterate over JSON with foreach command

The foreach command which was introduced recently and allows you to iterate over any list of input and run a command using each item in the list has been enhanced to also allow you to iterate from the CLI over any JSON string that you pipe in.

Directory Watchers have more data

Now when you create a directory watcher in a task runner or custom command, you can not only get notified when something in that directory changes, but you also now receive a list of files added, removed, and modified.

New "coldbox watch-reinit" command

Thanks to Scott Steinbeck, we have a new command called coldbox watch-reinit. This will watch for changes to certain files in your project and will automatically issue a framework reinit when you edit things like configs or services.

Color all the JSONs

Thanks to John Berquist, CommandBox now has sweet color coding any time it outputs JSON to the screen. Try it out by running something like "server show".

Users can also customize the colors they see for JSON with the following config settings:

• json.ansiColors.constant

• json.ansiColors.key

• json.ansiColors.number

• json.ansiColors.string

Setting values can be any color name from the system-colors command.

New Gist endpoint

Thanks to Jason Steinshouer we have a new Gist endpoint for installing code from a public Gist.

4.4.0 Release Notes

Bug

New Feature

Improvement

Cached HTTP Downloads

You can now cache downloads using the HTTP(S) endpoints using the following syntaxes:

This will speed up builds.

Change to Previous Directory

Thanks to a pull request from John Berquist, we've borrowed a Bash and Powershell feature of being able to change back to your previous working directory by typing this:

Better Tab Completion

Thanks to more pull requests from John Berquist, you can use file and folder based tab completion when typing native binaries from CommandBox

And tab completion also works better now when typing a quoted string such as a file path that contains a space. This is a huge timesaver!

Access to Intercept data in package scripts

Package scripts that are fired from internal interception points, can access any intercept data via environment variables. This example writes a file into a server home directory when the server starts, using an environment variable to dynamically find the correct path.

Release Notes

Here are the full release notes for CommandBox 4.8.0:

Bug

New Feature

Improvement

Here's the full list of what we've packed into the 4.7.0 release. Click any ticket link for more details.

Bug

• [] - CommandBox not recognizing implicit folder endpoint

• [] - Update semver for fix in prerelease comparison

• [] - Tokenizer breaks "run" command with odd syntax

• [] - init-wizard command is incorrectly aliasing as init

• [] - File watcher that modifies the file system triggers the watcher again

• [] - bump command doesn't work on a submodule

• [] - Text on standard input causes banner and prompt to be blank

• [] - Inconsistent behavior of "run" command.

• [] - Tab completion incorrect for some partial command names

• [] - Interactive jobs are not thread safe

Improvement

• [] - Leading zeros in semver prevent them from being matched

• [] - Allow --verbose flag on uninstall command

• [] - Add --roundup flag to indents command

• [] - JSON Schema for box.json

• [] - Update JGit to 5.3.0.201903130848-r

• [] - Update Jline to 3.10.0

• [] - Remove Riaforge endpoint Rince riaforge is dead

• [] - Modify default box.json from "init" command

• [] - Add box: namespace for compat with Coldbox injection DSL

• [] - Improve debugging and error messages for custom ForgeBox endpoints

• [] - If the test runner produces a 500 exception during watcher no output is shown

• [] - support for Environment variables in "Key" names

• [] - Make env vars in CommandBox visible to native OS binaries

• [] - Launching VSCode from ConEMU screws up the integrated terminal

• [] - Keep relative installPaths in box.json

The main features of CommandBox 4.5.0 are:

• Ability to install OpenJDK automatically for your servers to use ()

• Environment Variables in the shell ()

• Support for Forgebox Enterprise (TBA soon)

• JRE Bundled CommandBox installs now use OpenJDK instead of Oracle JDK

• TestBox Code Coverage integration ()

I already wrote a fairly comprehensive overview of the new features and big fixes here. Go read it:

Note, there are two backwards incompatible changes. The first is we turned OFF directory browsing by default on servers. You can easily get the old behavior back with

The second is that unhandled errors in the shell no longer show the stack trace (you probably wouldn't have noticed if I didn't tell you!) Get the old behavior back with:

Release Notes

Here's the full list of everything that went into this release.

Bug

• [] - editing in the shell prompt is buggy while using Gitbash in VSCode

• [] - Passing positional args to task errors with required param

• [] - Passing command string as single arg to box fails

• [] - Exitting recipe with exit code errors

• [] - external module mappings broken in CommandBox 4

• [] - Incorrect behavior when parsing unmatched quotes

• [] - Cruft left in temp folder

• [] - Silence annoying ESAPI warnings

• [] - Warnings on java 11 about illegal reflective access

New Feature

Improvement

In this section you will find the release notes for the 3.x version of CommandBox.

• Version 3.9.0 - Nov 2017

• Version 3.8.0 - Aug 2017

• Version 3.7.0 - Jul 2017

• Version 3.6.0 - Mar 2017

• Version 3.5.0 - Jan 2017

• Version 3.4.0 - Nov 2016

• Version 3.3.0 - Oct 2016

• Version 3.2.0 - Jul 2016

• Version 3.1.1 - Jul 2016

• Version 3.0.1 - Feb 2016

• Version 3.0.0 - Feb 2016

Release Highlights

• Fixed the annoying "server spanner" error that *nix users saw when starting servers.

• Updated CLI engine (and default server) version to Lucee 5.2.7.63 which includes an important security fix.

• Added a new "noninteractive" setting to improve the output on build servers like Jenkins or Travis-CI

• Task runner metadata changes picked up without needing to reload the CLI

• Ability to load ad-hoc modules on the fly from Task Runners

Release Notes

Here's the full list of tickets we addressed in the 4.1.0 release. Thanks to those who send me pull requests for some of these fixes and features!

Bug

• [COMMANDBOX-791] - server start on linux: "/bin/bash not found" message displays

• [COMMANDBOX-799] - Improve port binding logic

• [COMMANDBOX-802] - Task component metadata is not refreshed before each run

• [COMMANDBOX-806] - Error when invalid UTF-8 characters are in servers.json

New Feature

• [COMMANDBOX-669] - Localized CommandBox Modules

• [COMMANDBOX-793] - Add new slugify function to the formatter utility

• [COMMANDBOX-794] - When creating coldbox skeleton apps, clear out the basic name, slug, version, location and scripts so the user can configure them

• [COMMANDBOX-797] - Added new bundles,labels,verbose,directory arguments to the testbox watch command to allow for granular executions

• [COMMANDBOX-798] - Added verbose options to passthrough to the testbox runner so it true it can return the debug buffer

Improvement

• [COMMANDBOX-792] - Remove legacy installColdbox, installColdboxBE, installTestbox arguments from create commands

• [COMMANDBOX-796] - Added ability to visualize the exception stacktraces with a configurable depth.

• [COMMANDBOX-800] - Add setting to force "non interactive" shell that disables fancypants progress output

• [COMMANDBOX-803] - Change user agent on downloader to get around proxies like cloudflare

• [COMMANDBOX-804] - Store less "result" text in CommandBox's servers.json

• [COMMANDBOX-807] - Upgrade core Lucee engine to 5.2.7.63

Task Target Dependencies

For a task that has more than one target (method) you can specify dependencies that will run, in the order specified, prior to your final target. Specify task target dependencies as a comma-delimited list in a depends annotation on the target function itself. There is no limit to how many target dependencies you can have, nor how deep they can nest.

component {
  
  function run() depends="runMeFirst" {
  }

  function runMeFirst() {
  }

}

Given the above Task Runner, typing

task run

would run the runMeFirst() and run() method in that order.

Docs:

https://commandbox.ortusbooks.com/task-runners/task-target-dependencies

GZip Compression

The web server in CommandBox is capable of enabling GZIp compression to reduce the size of HTTP responses. To enable GZip compress on your CommandBox server, add a web.gzipEnable setting in your server.json file.

server set web.gzipEnable=true

Docs: https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/gzip-compression

Add --simple flag to ls/dir command

When you get a directory listing in CommandBox, you can add the --simple flag which will only output the file and folder name without any other information. This feature was added to compliment the feature below.

ls --simple

forEach Command

The foreach command will execute another command against every item in an incoming list. The list can be passed directly or piped into this command. The default delimiter is a new line so this works great piping the output of file listings directly in, which have a file name per line.

This example will find all JSON files in a directory and run the cat command against them.

ls *.json --simple | forEach cat

Docs: https://commandbox.ortusbooks.com/usage/foreach-command

Java 9/10/11 support

This is still a little experimental since it hasn't gone through full testing, but we upgraded to Lucee 5.2.9.31 in the core CLI which has support for the newer versions of Java. We've removed the checks that previously preventing CommandBox from even trying to run on versions of Java later than 8 and at first glance it seems to be working though there's been some flakiness on Java 11. Please help test these later Java versions and remember that if you spin up a server, you'll want to still dial in Java 8 for Adobe CF 2016 and prior and Lucee 5.2.8.50 and prior even if you have the CLI running on Java 9+.

Docs for setting custom Java version in your server:

https://commandbox.ortusbooks.com/embedded-server/configuring-your-server/custom-java-version

Release notes

Here's the full release notes for CommandBox 4.3.0.

Bug

• [COMMANDBOX-692] - Command Box failed to initialize using java 9

• [COMMANDBOX-845] - CFFileServlet doesn't work with default rewrites in ACF 2016

• [COMMANDBOX-849] - We need to review exit codes in Tasks

• [COMMANDBOX-856] - WireBox/LogBox upgrade broke system logging

• [COMMANDBOX-857] - Engine name not detected correctly when using HTTP URL for cfengine

• [COMMANDBOX-860] - Fix annoying web-inf folder for Flex logs on Adobe engines

• [COMMANDBOX-861] - Missing line break when following log file

• [COMMANDBOX-865] - Spelling error in info message for accessLogEnable

• [COMMANDBOX-867] - coldbox create app cuts last char from package name

• [COMMANDBOX-869] - Starting Adobe server errors when no CFIDE mapping is defined

• [COMMANDBOX-871] - CommandDSL parsing doesn't handle quoted text in command

New Feature

• [COMMANDBOX-848] - Task method dependencies

• [COMMANDBOX-852] - Add setting for GZip compression

• [COMMANDBOX-858] - Add --simple flag to ls/dir command to only output filename

• [COMMANDBOX-859] - Add "forEach" command to execute command once per incoming line

Improvement

• [COMMANDBOX-824] - TestBox Run command could use a way to add custom url parameters. Also the options parameter does nothing

• [COMMANDBOX-846] - Improve progress bar cleanup and exit codes on Ctrl-C

• [COMMANDBOX-851] - Allow Java jars to be installed from S3

• [COMMANDBOX-854] - JSON Schema for server.json

• [COMMANDBOX-863] - Upgrade CLI to Lucee 5.2.9.31

• [COMMANDBOX-864] - Support sorting JSON objects by key when formatting

• [COMMANDBOX-866] - Task DSL assume CWD of task file

• [COMMANDBOX-868] - coldbox scaffold install testbox by default

• [COMMANDBOX-870] - Allow command DSL params() to be called more than once

• [COMMANDBOX-872] - Make resolvePath() in Base command/task

• [COMMANDBOX-873] - Reload shell doesn't always fire when non-CommandBox modules get updated in core

• [COMMANDBOX-874] - Allow print helper to accept complex objects and serialize them for output.

UNC Network path support

This has been pretty big for Windows users who access files on their servers over a UNC network path like \\server-name\foo\bar. You can now cd into paths starting with \\, perform file operations like cat against those paths, etc. Note backslashes need escaped in the CommandBox shell.

CommandBox> cd \\\\server-name/share
CommandBox> cd \\\\192.168.123.105/share

This was pretty straightforward since Java already supports this, but I had to change a lot of core path handling to make sure the correct slashes were preserved. This needs a fair amount of testing to make sure we nailed it down for good. If your network share requires permissions, you'll need to have saved those in Windows Explorer already or execute a "net use" OS command from the shell.

Task Runner Improvements

When running a task from the CLI, the user will be automatically prompted if they don't supply all the required args. This is just like commands work now.

CommandBox> task run myTask
Please enter required field "Foo": _

We also fixed several bugs with passing positional parameters and flag to task runners.

# positional
CommandBox> task run taskFileName targetName value1 value2 true
# named
CommandBox> task run taskFile=taskFileName target=targetName :param1=value1 :param2=value2 :param3=true
# Use a Flag
CommandBox> task run taskFileName targetName value1 value2 --:param3
CommandBox> task run taskFile=taskFileName target=targetName :param1=value1 :param2=value2 --:param3

"package link" and "package unlink" for module development

This has been a long time coming, but if you want to work on a CommandBox module now, you don't have to keep copying files over to your CommandBox installation just to test. Instead, just run this from the root of your module's repo:

CommandBox> package link

This will symlink (works on Windows and *nix) your module into the core CLI's modules folder and reload the shell so you can immediately start testing. When you're done, just run package unlink. If you'd like to use this same feature, but to link a ColdBox module's repo over to a test application so you can test it without making a copy, you can pass in the path to the remote modules folder you'd like to link to.

CommandBox> package link /path/to/test/app/modules

This is a little easier than using your OS's native symlink commands and can be used in recipes that will work across operating systems!

Everything Else (mostly)

The rest of the changes don't really need a dedicated section but they're worth mentioning, so I've put them in this tidy list :) If you'd like the ticket numbers, you can get them out of this full list of tickets in JIRA: https://ortussolutions.atlassian.net/secure/ReleaseNote.jspa?projectId=11000&version=20400

• box install returns failing exit code if a package install fails. This helps builds fail correctly if things go wrong

• When prompted to type in something like a missing parameter, your answer is no longer added to the command history

• The --debug flag works correctly when starting a server from your OS shell like $> box server start --debug

• box.json dependencies are stored with forward slashes so Mac and Windows devs stop fighting over which file to commit

• config set no longer prints out the value to avoid leaking secrets in build script output.

• Updating a package now uninstalls the previous version first to ensure a fresh start since the new version may have removed files.

• If you're setting CommandBox behind an AJP proxy, we exposed the flag and ports for that as first class citizens of server.json.

• Visual markers for private packages in the forgebox search command.

• The package init command creates a valid slug for private packages in the @user/slug format.

• Command parameters defaults work on all the aliases for a command now.

• New --local flag to server list to show all servers that have been started in the current working directory

• If for some reason you want to supply some ad-hoc JVM args to the actual CLI process, you can create a new environment var called BOX_JAVA_PROPS="foo=bar;brad=wood"

• You can now touch files in a non-existent directory and it will create the directory instead of erroring.

• Viewing a ForgeBox package via package show with a markdown based description, now has basic formatting in the CLI

• The default URL rewrite file doesn't try to rewrite requests to /favicon.ico even when it doesn't exist.

• Our CF11 servers no longer have secure profile enabled. That was causing issues due to some of the settings like returning 200 on error. If you were making use of that default, please use CFConfig to set what you need.

• At John Farrar's request, several URLs in output messages have had space put before and after them so capable shells will auto-link them correctly.

• Improved the Java networking error messages on server start if the host name wasn't correct in your host file and you were letting CommandBox pick a random port for you.

• Prevented unnecessary saves to box.json when installing to keep file updated dates from being touched.

• Added friendly check for Java 9 since it's not supported yet and the error that displayed made zero sense.

• Commands like forgebox show and forgebox list now can provide their data in JSON format. ex: forgebox show coldbox --json

Bug

• [COMMANDBOX-579] - --debug flag is eaten when running CommandBox from native OS

• [COMMANDBOX-640] - Ensure clean install/update of packages

• [COMMANDBOX-681] - Touching file in nonexistent directory errors instead of creating directory

• [COMMANDBOX-682] - CommandDSL that errors out doesn't reset CWD

• [COMMANDBOX-684] - positional task args don't work

• [COMMANDBOX-686] - cp command doesn't work for folders

• [COMMANDBOX-689] - CommandBox Modules customInterceptionPoints can't accept an array

• [COMMANDBOX-690] - CommandBox has no `processState` method on the InterceptorService

• [COMMANDBOX-691] - Flags aren't passed correctly to task runners

• [COMMANDBOX-701] - CFML functions don't handle incoming JSON with pound signs

New Feature

• [COMMANDBOX-653] - Expose Runwar AJP listener settings

• [COMMANDBOX-663] - Update server list and server info to be able to show all the servers on a particular directory

• [COMMANDBOX-668] - New package link and package unlink commands

• [COMMANDBOX-680] - Add ad-hoc JVM props via an environment variable

Improvement

• [COMMANDBOX-178] - Don't store text entered to "ask()" command in history

• [COMMANDBOX-565] - Handle minor version updating a bit better

• [COMMANDBOX-607] - Always store dependency install paths with forward slashes

• [COMMANDBOX-609] - Have a setting to not show secrets when printing out the config

• [COMMANDBOX-624] - Support UNC file paths on Windows

• [COMMANDBOX-639] - JSON format for forgebox endpoints

• [COMMANDBOX-659] - Ask user for required params to task runners

• [COMMANDBOX-660] - Visually show if a package is private when listing or showing

• [COMMANDBOX-661] - make package init create correct slug for private package

• [COMMANDBOX-662] - Make default command parms work on aliases

• [COMMANDBOX-670] - Box install failures to produce non-zero exit codes so build fails instead of continuing installation.

• [COMMANDBOX-683] - Provide ANSI formatting for markdown package descriptions

• [COMMANDBOX-685] - box.json template isn't proper JSON

• [COMMANDBOX-687] - Remove background color from CommandBox ASCII art

• [COMMANDBOX-688] - Default rewrite rules to ignore favicon.ico

• [COMMANDBOX-694] - Disable Secure Profile on CFEngine WARs

• [COMMANDBOX-696] - Leave space around URLs so some consoles will be clickable

• [COMMANDBOX-697] - Improve performance of package install ignores

• [COMMANDBOX-700] - Improve error message in ServerService.getRandomPort()

• [COMMANDBOX-707] - Prevent unnecessary writes to box.json file when installing dependencies

• [COMMANDBOX-708] - Improve formatting when asking for required param that has no hint

• [COMMANDBOX-712] - Add Java 9 check to CommandBox until its supported

Bug

• [COMMANDBOX-665] - Relative SSL certFile or keyFile path in server.json isn't expanded

• [COMMANDBOX-674] - propertyfile set errors if file doesn't exist

New Feature

• [COMMANDBOX-675] - Allow relative property file paths in task runners

Improvement

• [COMMANDBOX-666] - Allow custom tray contributions to have relative image path

• [COMMANDBOX-667] - Improve coldbox create app --wizard

• [COMMANDBOX-671] - Always run onServerInstall

• [COMMANDBOX-672] - add getInstance() to base interceptor class

• [COMMANDBOX-673] - Improve handling of loading a bad modules

• [COMMANDBOX-678] - Command to normalize line endings for a batch of files

• [COMMANDBOX-679] - Improve package parsing regex for private packages

Random Fixes

In no particular order...

• Fix background colors not showing up in Powershell and Windows cmd

• System Setting expansions not always working in server.json

• testbox run no longer blindly assumes you're returning JSON.

• Piping commands into box was broken since 4.0.0

• Starting server with --debug didn't output logs on error.

Random New Features

Sorted by createUUID() DESC...

• Custom commands have more control over their tab completion candidates. Docs Here

• Control how many levels deep package list displays

• New versions of Lucee, JGit, JLine, and WireBox

• More pack200 of the Lucee jar (and more improvements to come soon in the next version of Lucee)

• Automatic detection for build servers like Travis-CI to hide progress bar animations. Docs Here

• Cloning Git repos during install has a nice new progress bar that plays well with interactive jobs

• You can use the aforementioned progress bar for your own purposes in custom commands and Task Runners. Docs Here